Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P007122
    VOLVO

    ECM-P007122 - Ambient Air Temperature Sensor Circuit "A" Range/Performance. General Signal Failures. Signal too high

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    8 models

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (8)
    • Volvo S60 (2011–)2014–2015Engine D4204T5 only
    • Volvo S80 (2007–)2014–2015Engine D4204T5 only
    • Volvo V40 (2013–)2015Engine D4204T14 only
    • Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
    • Volvo V60 (2011–)2014–2015Engine D4204T5 only
    • Volvo V70 (2008–)2014–2015Engine D4204T5 only
    • Volvo XC60 (2009–)2014–2015Engine D4204T5 only
    • Volvo XC70 (2008–)2014–2015Engine D4204T5 only

    What does this fault code mean?

    The engine control module monitors outside temperature sensor A and, after a long stop, checks its reading against other temperatures in the car. The code is set when the signal is too high and the outside temperature therefore deviates too much from the other values.

    Possible causes

    • Contact resistance in the connection
    • Outside temperature sensor A is damaged

    What you can do

    1. 1If you have a diagnostic tool, read the outside temperature in live data and compare it with the other temperatures in the car. The values should roughly agree
    2. 2Read the fault code with a diagnostic tool and note whether it is active or only stored
    3. 3Make sure the fuses are intact. Their location is given in the instruction manual
    4. 4With the ignition off, check the sensor connector for contact resistance and oxidation
    5. 5Have a workshop check the sensor if the fault remains after the connector has been checked

    Symptoms you may notice1

    • No noticeable symptoms for the driver

    What the fault can affect1

    • A calculated value is used for the outside temperature

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.