VOLVO
ECM-P007317 - Ambient Air Temperature Sensor Circuit High. General Electrical Failures. Circuit voltage above threshold
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
Although the code names an air temperature sensor, it concerns the outside temperature sensor's signal, which the engine control module compares with the sensor's operating range. The code is set when that signal is too high.
Possible causes
- The outside temperature sensor is damaged
- The signal lead is short-circuited to supply voltage
What you can do
- 1Read the fault code with a diagnostic tool with the ignition in position II and note whether it is active
- 2Make sure the fuses are intact. Their location is given in the instruction manual or on the fuse chart
- 3If you have a diagnostic tool, compare the outside temperature in live data with the intake manifold air temperature. If the outside reading is clearly higher, suspect the sensor
- 4With a multimeter, check that the signal lead is not short-circuited to supply voltage
- 5Replace the sensor if the lead is intact but the fault remains
Symptoms you may notice1
- The outside temperature gauge shows the wrong value or does not work
What the fault can affect1
- The value from the engine's intake air temperature sensor in the intake manifold is used instead
General guidance for car owners. Diagnosis on the car can point to a different cause.