VOLVO
ECM-P007B26 - Charge Air Cooler Temperature Sensor Circuit Range/Performance (Bank 1). General Signal Failures. Signal rate of change below threshold
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The fault code concerns how quickly the temperature signal from the boost pressure sensor changes. When the rate of change falls below a limit, the signal is considered unstable and the fault code is set. The check runs with the engine running.
Possible causes
- Loose connection, contact resistance or oxidation in the connector
- Damaged boost pressure sensor (TMAP)
What you can do
- 1Check the boost pressure sensor connector for looseness, since play gives an uneven signal
- 2Look for chafed or pinched wiring running to the sensor
- 3If you have a diagnostic tool: read the sensor temperature in live data while driving and check whether it rises under hard acceleration and falls again when cruising gently
- 4Have a workshop check the boost pressure sensor if the connector and wiring are in order but the fault remains
Symptoms you may notice1
- The engine may hesitate, surge or run jerkily while driving
General guidance for car owners. Diagnosis on the car can point to a different cause.