VOLVO
ECM-P00C424 - Turbocharger/Supercharger Bypass Valve "B" - Mechanical. General Signal Failures. Signal stuck high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15 only
- Volvo V40 (2013–)2015Engine B4204T11 only
- Volvo V40 Cross Country (2013–)2015Engine B4204T11 only
- Volvo V60 (2011–)2014–2015Engine B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo V70 (2008–)2014–2015Engine B4204T11 only
- Volvo XC60 (2009–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11 only
What does this fault code mean?
The engine control module (ECM) monitors the adaptation of the compressor bypass valve, meaning the learned values that control it. The fault concerns a signal that stays constantly high. The code is stored when an adaptation value falls outside the predefined range, and
Possible causes
- The bypass valve adaptation value is outside the predefined range
What you can do
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the connections to the bypass valve are fully seated and free from corrosion
- 3Look for dirt and clean the compressor throttle if needed
- 4Have a workshop reset the adaptation once the mechanical side is in order, then confirm with a road test that the code does not come back
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.