VOLVO
ECM-P010500 - Manifold Absolute Pressure/BARO Circuit. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (13)
- Volvo S60 (2011–)2011–2014Engine B6304T4 only
- Volvo S60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2007Engine B6324S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S only
- Volvo V60 (2011–)2011–2014Engine B6304T4 only
- Volvo V60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo XC60 (2009–)2009–2010Engine B6304T2 only
- Volvo XC60 (2009–)2011–2015Engine B6304T4 only
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The ECM measures the pressure in the intake pipe with an air pressure sensor. The code is stored when the reading is wrong for a set time or over two or more consecutive drive cycles.
Possible causes
- Break in the signal or ground wire
- Contact resistance and oxidation in the connections
- Signal wire shorted to supply voltage
- Air pressure sensor in the intake pipe is damaged
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the hoses and joints on the intake pipe for leaks and damage
- 3Check that the connector at the air pressure sensor sits firmly and is free from oxidation and play
- 4With a multimeter, check that the signal and ground wires to the sensor have no break
- 5If you have diagnostic equipment, compare the intake pressure in live data with the ignition on against the ambient pressure and check that the reading is plausible
- 6If the fault remains, have a workshop check the sensor
Symptoms you may notice1
- The eco indicator lamp in the instrument panel lights up
What the fault can affect1
- The control module uses a fixed value for intake pressure
General guidance for car owners. Diagnosis on the car can point to a different cause.