VOLVO
ECM-P013200 - O2 Sensor Circuit High Voltage (Bank 1 Sensor 1). General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
12 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (37)
- Volvo C30 (2007–2013)2011–2013Engine D4162T, D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo S60 (2011–)2011All engines except: B4204T6, B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2012All engines except: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014All engines except: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015All engines except: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo S80 (2007–)2011Engine B4164T, D5204T2, D5244T10 only
- Volvo S80 (2007–)2012Engine B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013Engine B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S80 (2007–)2014All engines except: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015All engines except: B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014All engines except: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015All engines except: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Engine B4164T, D4162T, D5204T4, D5204T6 only
- Volvo V40 Cross Country (2013–)2015All engines except: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V50 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo V60 (2011–)2011All engines except: B4204T6, B4204T7, B6304T4
- Volvo V60 (2011–)2012All engines except: B4204T7, B6304T4
- Volvo V60 (2011–)2013All engines except: B4204T7, B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014All engines except: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015All engines except: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo V70 (2008–)2011Engine B4164T, D5204T2, D5244T10 only
- Volvo V70 (2008–)2012All engines except: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014All engines except: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015All engines except: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC60 (2009–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2013–2014All engines except: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015All engines except: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC70 (2008–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC70 (2008–)2012–2015All engines except: B6304T4, B6324S4, B6324S5
What does this fault code mean?
This code means the front oxygen sensor (bank 1, sensor 1) or its signal wires are short-circuited, either to supply voltage or to ground. It is set while the engine runs and can be caused by a damaged oxygen sensor.
Possible causes
- Signal cable shorted to supply voltage
- Ground lead shorted to supply voltage
- Damaged front heated oxygen sensor (HO2S)
What you can do
- 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle
- 2With the connector unplugged at the oxygen sensor, use a multimeter to check that the signal and ground wires are not short-circuited to positive
- 3Check the connectors at the oxygen sensor for contact resistance and oxidation. Do not use rust solvent spray or grease in the connector
- 4If the wiring is in order and the fault remains, have a workshop check or replace the oxygen sensor
Symptoms you may notice3
- The Check engine light comes on or behaves abnormally
- The engine has poor performance and lacks power, especially when starting
- The engine hesitates, surges or runs unevenly at steady speed
What the fault can affect1
- The control module uses a calculated value for the oxygen sensor
General guidance for car owners. Diagnosis on the car can point to a different cause.