What does fault code ECM-P014A00 mean?

Diagnostic fault code details for ECM-P014A00 (Volvo S80 (2007–), Volvo S80 (2007–), Volvo S80 (2007–)). Repair service at OBD Tuning.

VOLVO

ECM-P014A00 - O2 Sensor Slow Response - Rich to Lean (Bank 2, Sensor 2). General Failure Information. No sub type information

System

Engine Control Module (ECM)

Volvo models this fault code applies to

This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

Applies to the following models:

4 models

S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Show models by year and engine (9)

What does this fault code mean?

The rear oxygen sensor in bank 2, sensor 2, sits in the cylinder row furthest to the rear. The engine control module (ECM) controls the mixture between rich and lean and checks whether the sensor follows the switches. The code is set when the sensor reacts too slowly at the switch from rich to lean, in certain driving cases with fuel cut-off.

Possible causes

Contact resistance or oxidation in the connections
Damaged rear oxygen sensor

What you can do

1Read the code, clear it and road test the car to see whether it comes back
2Check the connector at the rear sensor in bank 2 for contact resistance and oxidation; do not use rust solvent spray or grease
3If the connector is clean and intact, replace the rear oxygen sensor in bank 2

Symptoms you may notice1

Check engine light (MIL) on

General guidance for car owners. Diagnosis on the car can point to a different cause.

VOLVO

ECM-P014A00 - O2 Sensor Slow Response - Rich to Lean (Bank 2, Sensor 2). General Failure Information. No sub type information

System

Engine Control Module (ECM)

Volvo models this fault code applies to

This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

Applies to the following models:

4 models

S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Show models by year and engine (9)

What does this fault code mean?

Possible causes

Contact resistance or oxidation in the connections
Damaged rear oxygen sensor

What you can do

1Read the code, clear it and road test the car to see whether it comes back
2Check the connector at the rear sensor in bank 2 for contact resistance and oxidation; do not use rust solvent spray or grease
3If the connector is clean and intact, replace the rear oxygen sensor in bank 2

Symptoms you may notice1

Check engine light (MIL) on

General guidance for car owners. Diagnosis on the car can point to a different cause.

ECM-P014A00 - O2 Sensor Slow Response - Rich to Lean (Bank 2, Sensor 2). General Failure Information. No sub type information

Volvo models this fault code applies to

O2 Sensor Slow Response - Rich to Lean (Bank 2, Sensor 2). General Failure Information. No sub type information

O2 Sensor Delayed Response - Rich to Lean (Bank 2 Sensor 2). General Failure Information. No sub type information

Applies to the following models:

What does this fault code mean?

Possible causes

What you can do

Symptoms you may notice1

ECM-P014A00 - O2 Sensor Slow Response - Rich to Lean (Bank 2, Sensor 2). General Failure Information. No sub type information

Volvo models this fault code applies to

O2 Sensor Slow Response - Rich to Lean (Bank 2, Sensor 2). General Failure Information. No sub type information

O2 Sensor Delayed Response - Rich to Lean (Bank 2 Sensor 2). General Failure Information. No sub type information

Applies to the following models:

What does this fault code mean?

Possible causes

What you can do

Symptoms you may notice1