VOLVO
ECM-P017068 - Fuel Trim (Bank 1). Algorithm Based Failures. Event information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (36)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008All engines except: B5254T6, D4204T, D5244T4, D5244T5
- Volvo S80 (2007–)2009Engine B4204S3, B4204S4, B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B4204S3, B4204S4, B6324S2 only
- Volvo S80 (2007–)2011Engine B4204S3, B4204S4, B6324S4 only
- Volvo S80 (2007–)2012–2013Engine B6324S4 only
- Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15, B6324S4 only
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B4204S3, B4204S4, B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B4204S3, B4204S4, B6324S2 only
- Volvo V70 (2008–)2011Engine B4204S3, B4204S4 only
- Volvo V70 (2008–)2014–2015Engine B4204T11 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4 only
- Volvo XC60 (2009–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4 only
- Volvo XC60 (2009–)2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4 only
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6324S4 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6324S4 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The code is event-controlled and intended as information, and it does not indicate a fault in the engine control module. The engine control module (ECM) monitors the lambda control for bank 1 and sets the code if it is outside its limit values for a certain time while the engine is running. At full load the sensor then shows an unreasonably low lambda value, which indicates that too much fuel has been supplied.
Possible causes
- No repair is needed for this code, as it reflects information only
What you can do
- 1There is no separate fault-tracing for this code; read it and clear it like a normal fault code
- 2Road test the car and read the code again to see whether it comes back
- 3If the code returns and the car behaves differently, have a workshop check the lambda control
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.