VOLVO
ECM-P018124 - Fuel Temperature Sensor A Circuit Range/Performance. General Signal Failures. Signal stuck high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsS60 (2011–), S80 (2007–), V70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2011–2012Engine B5254T5 only
- Volvo S80 (2007–)2007–2008Engine B5254T6 only
- Volvo S80 (2007–)2009Engine B5254T6, B5254T8 only
- Volvo S80 (2007–)2010–2011Engine B5254T10, B5254T11, B5254T8 only
- Volvo S80 (2007–)2012Engine B5254T10 only
- Volvo V70 (2008–)2008Engine B5254T6 only
- Volvo V70 (2008–)2009Engine B5254T6, B5254T8 only
- Volvo V70 (2008–)2010–2011Engine B5254T10, B5254T11 only
- Volvo V70 (2008–)2012Engine B5254T10 only
What does this fault code mean?
At the moment the engine is started, the engine control module (ECM) compares the fuel temperature sensor value with the intake, engine and outside temperatures. The code is set if the value is above a certain limit in relation to the others, and the control module then uses a predefined value for the fuel temperature.
Possible causes
- Damaged fuel temperature sensor
- Contact resistance or oxidation in the connections
What you can do
- 1Read the code, clear it and road test the car to see whether it comes back
- 2If you have a diagnostic tool: compare the fuel temperature with the outside temperature in live data when the engine is started
- 3Check the connector at the fuel pressure sensor for contact resistance and oxidation
- 4If the connector is intact but the fault remains, have a workshop replace the fuel pressure sensor
Symptoms you may notice1
- Check engine light (MIL) on
What the fault can affect1
- The control module uses a predefined value for the fuel temperature
General guidance for car owners. Diagnosis on the car can point to a different cause.