VOLVO
ECM-P01931F - Fuel Rail Pressure Sensor "A" Circuit High. General Electrical Failures. Circuit intermittent
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine D4204T5 only
- Volvo S80 (2007–)2014–2015Engine D4204T5 only
- Volvo V40 (2013–)2015Engine D4204T14 only
- Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
- Volvo V60 (2011–)2014–2015Engine D4204T5 only
- Volvo V70 (2008–)2014–2015Engine D4204T5 only
- Volvo XC60 (2009–)2014–2015Engine D4204T5 only
- Volvo XC70 (2008–)2014–2015Engine D4204T5 only
What does this fault code mean?
The control module (ECM) compares the four pressure sensors in the injectors with each other against a highest permitted value. The code is set when any signal goes above the highest value. The fault is intermittent, meaning sporadic, and it may only be present some of the time.
Possible causes
- Poor contact in the connections to the injectors
- The sensor in one of the injectors is faulty
What you can do
- 1Check the injector connectors for looseness and oxidation
- 2Clear the code and start the engine to see whether it returns
- 3If you have a diagnostic tool: read the pressure from each injector in live data and see whether any one is clearly high compared with the others
- 4If the fault remains, a workshop with diagnostic equipment should check the pressure sensor in the injector that differs
Symptoms you may notice2
- Uneven idle
- The engine may stall at idle or while driving
What the fault can affect1
- The value from pressure sensor 4 is used instead
General guidance for car owners. Diagnosis on the car can point to a different cause.