VOLVO
ECM-P023422 - Turbocharger/Supercharger A Overboost Condition. General Signal Failures. Signal too high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The engine control module (ECM) compares the measured boost pressure with the target value it has set. The fault is set when the signal from the boost pressure sensor is too high, and it may then be caused by the control of the wastegate valve or by the turbo control valve.
Possible causes
- Incorrect setting of the wastegate valve pressure actuator
- Sticking wastegate valve
- Damaged turbo control valve
What you can do
- 1Read the code, clear it and road test to see whether it returns
- 2If you have a diagnostic tool: activate the turbo control valve and listen for a click while it operates
- 3Look at the wastegate valve pressure actuator for cracks and loose hoses
- 4If the fault remains, have a workshop check that the turbo control valve works, and adjust the pressure actuator if it is set incorrectly
Symptoms you may notice1
- Poor performance and lack of power while driving
What the fault can affect1
- Boost pressure is lower because the boost valve is fully opened
General guidance for car owners. Diagnosis on the car can point to a different cause.