VOLVO
ECM-P02514B - Injection Pump Fuel Metering Control A. System Internal Failures. Over temperature
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
2 modelsS80 (2007–), V70 (2008–)
Show models by year and engine (2)
What does this fault code mean?
The ECM watches the fuel pressure control valve and how it works. The fault is set when the control module registers a temperature that is too high in connection with the valve, which can cause the engine to stall or not start.
Possible causes
- The fuel pressure control valve is sticking, and there may be contamination such as water or dirt in the fuel system
- Damaged fuel pressure control valve
What you can do
- 1Read the code, clear it and road test to see whether it returns
- 2Check that the fuel level in the tank is not low, and top up if it is
- 3Check whether the fuel filter is clogged or old, and have a workshop replace it if needed
- 4Look under the car and along the fuel lines for fuel leaks
- 5If the fault remains, have a workshop check the fuel pressure control valve with diagnostic equipment
Symptoms you may notice3
- The car feels poor to drive, with reduced performance and lack of power
- The engine stalls
- The engine will not start or does not crank
General guidance for car owners. Diagnosis on the car can point to a different cause.