VOLVO
ECM-P027400 - Cylinder 5 Injector Circuit High. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (29)
- Volvo S60 (2011–)2011–2012Engine B5254T5, B6304T4 only
- Volvo S60 (2011–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2007–2008Engine B5254T6 only
- Volvo S80 (2007–)2009Engine B5254T6, B5254T8 only
- Volvo S80 (2007–)2010Engine B5254T10, B5254T11, B5254T8 only
- Volvo S80 (2007–)2011Engine B5254T10, B5254T11, B5254T8, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2012Engine B5254T10, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013–2014Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Engine B5254T6 only
- Volvo V70 (2008–)2009Engine B5254T6, B5254T8 only
- Volvo V70 (2008–)2010Engine B5254T10, B5254T11 only
- Volvo V70 (2008–)2011Engine B5254T10, B5254T11, B6304T4, B6324S5 only
- Volvo V70 (2008–)2012Engine B5254T10, B6304T4, B6324S5 only
- Volvo V70 (2008–)2013–2014Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B5204T9, B6304T4 only
- Volvo XC60 (2009–)2011–2014Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015Engine B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The ECM checks the circuits to the injectors and stores the code when the signal to the injector for cylinder 5 is too high. The code is general and does not say what type of fault it is. It applies to cylinder 5 only.
Possible causes
- Signal wire short-circuited to supply voltage
- Damaged injector
What you can do
- 1Read and note the fault code, clear it and test drive to see whether it returns
- 2With the ignition on and the connector disconnected, use a multimeter to check whether the cylinder 5 signal wire has voltage to ground
- 3Check the connector to the cylinder 5 injector for contact resistance and oxidation
- 4Have a workshop with diagnostic equipment check the injector for cylinder 5 and its control
Symptoms you may notice2
- The emissions warning lamp comes on
- The engine does not run on all cylinders
What the fault can affect1
- The control module blocks lambda control
General guidance for car owners. Diagnosis on the car can point to a different cause.