Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P02FA28
    VOLVO

    ECM-P02FA28 - Diesel Intake Air Flow Position Sensor Minimum/Maximum Stop Performance. General Signal Failures. Signal bias level out of range / zero adjustment failure

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    9 models

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Show models by year and engine (9)
    • Volvo C30 (2007–2013)2011–2013Engine D4162T only
    • Volvo S40 (2004–2013)2011–2012Engine D4162T only
    • Volvo S60 (2011–)2011–2015Engine D4162T only
    • Volvo S80 (2007–)2012–2015Engine D4162T only
    • Volvo V40 (2013–)2013–2015Engine D4162T only
    • Volvo V40 Cross Country (2013–)2013–2015Engine D4162T only
    • Volvo V50 (2004–2013)2011–2012Engine D4162T only
    • Volvo V60 (2011–)2011–2015Engine D4162T only
    • Volvo V70 (2008–)2012–2015Engine D4162T only

    What does this fault code mean?

    The engine control module (ECM) compares the learned limits of the control valve for the closed and open positions. If the limit for the open position is outside the permitted range, the fault code is stored. The fault is general and does not specify the type. The cause can be a sticking control valve due to dirt or contamination, or a damaged control valve.

    Possible causes

    • Sticking control valve due to dirt or contamination
    • Damaged control valve in the intake air inlet

    What you can do

    1. 1Read the fault code and clear it, then run the engine and see whether it returns
    2. 2Check that the control valve in the intake air inlet moves freely and is not dirty or blocked
    3. 3Check that the fuses are intact; their locations are shown in the instruction manual or on the fuse box cover
    4. 4If you have a diagnostic tool: read the control valve's learned limits in live data with the engine running and see whether either one lies outside the expected range
    5. 5Have a workshop with diagnostic equipment check the valve and replace it if it is damaged

    Symptoms you may notice1

    • No noticeable symptoms for the driver

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.