Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P030068
    VOLVO

    ECM-P030068 - Random Misfire Detected. Algorithm Based Failures. Event information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    8 models

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (8)
    • Volvo S60 (2011–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
    • Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15 only
    • Volvo V40 (2013–)2015Engine B4204T11 only
    • Volvo V40 Cross Country (2013–)2015Engine B4204T11 only
    • Volvo V60 (2011–)2014–2015Engine B4204T11, B4204T12, B4204T15, B4204T9 only
    • Volvo V70 (2008–)2014–2015Engine B4204T11 only
    • Volvo XC60 (2009–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
    • Volvo XC70 (2008–)2014–2015Engine B4204T11 only

    What does this fault code mean?

    The fault code is event-based and intended as information; it does not show a fault in the engine control module. It is stored when, while driving on the road, the control module detects that the intensity of the registered misfires exceeds a threshold. It can be linked to a damaged ignition coil or a leaking injector.

    Possible causes

    • Damaged ignition coil
    • Leaking injector

    What you can do

    1. 1First check for other fault codes for fuel, camshafts or ignition; these should be traced before this code
    2. 2If you have a diagnostic tool: read the misfire counters for each cylinder and see which cylinder stands out
    3. 3Check the ignition coil and injector on the cylinder that stands out for clear damage and connectors that are loose
    4. 4Have a workshop with diagnostic equipment check and, if needed, replace the ignition coil or injector, and check whether a newer version of the engine control module software is available

    Symptoms you may notice3

    • Poor performance and lack of power, especially when pulling away from standstill
    • The engine hesitates, surges or runs roughly under acceleration
    • The engine hesitates, surges or runs roughly at constant speed and when slowing down

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.