VOLVO
ECM-P030100 - Cylinder 1 Misfire Detected. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
14 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (46)
- Volvo C30 (2007–2013)2011–2013Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine B5254T5, B6304T4, D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine B5254T5, B6304T4, D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo S80 (2007–)2007
- Volvo S80 (2007–)2008–2009All engines except: D4204T
- Volvo S80 (2007–)2010All engines except: B4204T6, D4164T, D4204T
- Volvo S80 (2007–)2011All engines except: B4164T, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2013All engines except: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014All engines except: B4164T, B4164T2, B4204T6, B4204T7, D4162T, D4204T5
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T, D4204T5
- Volvo V40 (2013–)2013All engines except: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014All engines except: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9, D5204T6 only
- Volvo V40 Cross Country (2013–)2013–2014All engines except: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine B6304T4, D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine B6304T4, D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo V60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009All engines except: D4204T
- Volvo V70 (2008–)2010All engines except: B4204T6, D4164T, D4204T
- Volvo V70 (2008–)2011All engines except: B4164T, B4204T6, B4204T7, D4164T
- Volvo V70 (2008–)2012–2013All engines except: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014All engines except: B4164T, B4164T2, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015All engines except: B4164T, B4164T2, D4162T, D4204T5
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010All engines except: B4204T6
- Volvo XC60 (2009–)2011–2012All engines except: B4204T6, B4204T7
- Volvo XC60 (2009–)2013All engines except: B4204T7
- Volvo XC60 (2009–)2014–2015All engines except: B4204T7, D4204T5
- Volvo XC70 (2008–)2008–2013
- Volvo XC70 (2008–)2014–2015All engines except: D4204T5
- Volvo XC90 (2003–)2005–2006Engine B8444S only
- Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only
- Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
- Volvo XC90 (2003–)2012Engine B6324S5 only
- Volvo XC90 (2003–)2013–2014All engines except: B5254T9
What does this fault code mean?
The engine control module (ECM) registers misfires by measuring speed deviations in the flywheel. If cylinder 1 misfires too often, the fault code is stored. The code states which cylinder is affected. The cause may lie in the fuel, the air intake, the compression or the injection. The code is general and does not specify the type of fault.
Possible causes
- Low fuel level
- Repeated cold starts where the engine does not warm up between them
- Contaminated or incorrect fuel
- Air leak
- Clogged or leaking injection valve
- Uneven compression or damaged injection valves
What you can do
- 1Read the fault codes; codes for camshaft control or the camshaft control valve are traced first
- 2Check that the fuel level is sufficient and that the correct fuel has been filled; also make sure the engine oil is at the right level
- 3Check the ignition coil and injection valve on cylinder 1 for damage and oxidised connectors
- 4If you have a diagnostic tool: read the misfire counter for cylinder 1 with the engine running and compare it with the other cylinders
- 5Have a workshop with diagnostic equipment check the compression, the fuel pressure and the crankcase ventilation, and update the software if a newer version is available
Symptoms you may notice5
- The emissions warning light lights up or flashes
- The engine misfires and does not run on all cylinders
- The engine is hard to start
- Uneven idle and reduced performance
- A message appears in the text display
What the fault can affect2
- Rear oxygen sensor control is switched off
- Lambda control is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.