VOLVO
ECM-P032429 - Knock Control System Error. General Signal Failures. Signal signal invalid
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The engine control module (ECM) continuously monitors the function of the knock sensors. If the signal from either knock sensor is faulty, the fault code is stored. The fault may be caused by a knock sensor that is loose or incorrectly fitted, a damaged sensor, or a fault in the engine control module.
Possible causes
- Loose knock sensor
- Incorrectly fitted knock sensor
- Damaged knock sensor
- Damaged engine control module (ECM)
What you can do
- 1Read the fault code, clear it and test drive the car to see whether it returns
- 2Check that the knock sensors are firmly seated and fitted correctly
- 3Check the knock sensor connectors for oxidation and play
- 4If you have a diagnostic tool: read the knock signals from both sensors in live data with the engine running and compare them
- 5If the fault remains, have a workshop replace both knock sensors, since the control module cannot tell which one is faulty; if it still remains, the engine control module may need replacing
Symptoms you may notice1
- Poor performance and lack of power
General guidance for car owners. Diagnosis on the car can point to a different cause.