Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P034162
    VOLVO

    ECM-P034162 - Camshaft Position Sensor A Circuit Range/Performance (Bank 1 or single sensor). Algorithm Based Failures. Signal compare failure

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    9 models

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Show models by year and engine (9)
    • Volvo C30 (2007–2013)2011–2013Engine D4162T only
    • Volvo S40 (2004–2013)2011–2012Engine D4162T only
    • Volvo S60 (2011–)2011–2015Engine D4162T only
    • Volvo S80 (2007–)2012–2015Engine D4162T only
    • Volvo V40 (2013–)2013–2015Engine D4162T only
    • Volvo V40 Cross Country (2013–)2013–2015Engine D4162T only
    • Volvo V50 (2004–2013)2011–2012Engine D4162T only
    • Volvo V60 (2011–)2011–2015Engine D4162T only
    • Volvo V70 (2008–)2012–2015Engine D4162T only

    What does this fault code mean?

    The ECM checks the camshaft sensor signal against the crankshaft sensor signal. The fault is stored when the module finds a faulty signal during the comparison. The code applies to the camshaft sensor on bank 1, or to the single sensor if the engine has only one.

    Possible causes

    • Loose connections
    • Contact resistance or oxidation in the connections
    • Damaged camshaft sensor
    • Damaged crankshaft sensor

    What you can do

    1. 1If you have a diagnostic tool, start the engine and read the fault status. 'No fault found' means the fault is not active right now.
    2. 2Check that the fuses are intact.
    3. 3With the ignition off, check that the connectors at the camshaft sensor and the crankshaft sensor are secure and free from oxidation.
    4. 4Check that the camshaft sensor and the crankshaft sensor are correctly fitted in their positions.
    5. 5If your diagnostic tool shows it, compare the camshaft sensor position in live data with the engine speed while the engine runs.
    6. 6If the fault returns, have a workshop check the sensors and their wiring.

    Symptoms you may notice1

    • Engine does not start but cranks

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.