Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P035611
    VOLVO

    ECM-P035611 - Ignition Coil F Primary/Secondary Circuit. General Electrical Failures. Circuit short to ground

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    7 models

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Show models by year and engine (10)
    • Volvo S60 (2011–)2011–2014Engine B6304T4 only
    • Volvo S60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
    • Volvo S80 (2007–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
    • Volvo V60 (2011–)2011–2014Engine B6304T4 only
    • Volvo V60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
    • Volvo V70 (2008–)2011–2014Engine B6304T4, B6324S5 only
    • Volvo V70 (2008–)2015Engine B6304T4 only
    • Volvo XC60 (2009–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
    • Volvo XC70 (2008–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
    • Volvo XC90 (2003–)2011–2014Engine B6324S5 only

    What does this fault code mean?

    Ignition coil F has a signal wire that is shorted to ground. The code is stored when the fault persists over two or more driving cycles in a row.

    Possible causes

    • Contact resistance and oxidation in the connections
    • Signal wire short circuit to ground
    • Damaged ignition coil

    What you can do

    1. 1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means the fault is permanent.
    2. 2Check that the fuses are intact.
    3. 3With the ignition off, check the connector at ignition coil F for contact resistance and oxidation.
    4. 4Use a multimeter to check that the signal wire to ignition coil F is not shorted to ground (the body).
    5. 5Look along the signal wire to ignition coil F for chafed or pinched sections.
    6. 6If the fault returns, have a workshop check ignition coil F and its wire.

    Symptoms you may notice4

    • Car lacks power, especially when pulling away from standstill
    • Car hesitates or jerks during acceleration
    • Car hesitates or jerks at steady speed
    • Automatic engine start/stop does not work

    What the fault can affect1

    • Closed loop control of lambda is blocked

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.