VOLVO
ECM-P035613 - Ignition Coil F Primary/Secondary Circuit. General Electrical Failures. Circuit open
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (10)
- Volvo S60 (2011–)2011–2014Engine B6304T4 only
- Volvo S60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo V60 (2011–)2011–2014Engine B6304T4 only
- Volvo V60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo V70 (2008–)2011–2014Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B6304T4 only
- Volvo XC60 (2009–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The fault lies in the signal wire to ignition coil F, according to the code. The code is only stored once the fault has persisted over two or more driving cycles in a row, and it concerns the primary and secondary circuit of the coil.
Possible causes
- Contact resistance and oxidation in the connections
- Open circuit in the signal wire
- Damaged ignition coil
What you can do
- 1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means the fault is permanent.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the connector at ignition coil F is free from contact resistance and oxidation.
- 4Use a multimeter to check that the signal wire to ignition coil F has no open circuit.
- 5Check that the wiring to ignition coil F is not twisted, pinched or chafed.
- 6If the fault returns, have a workshop check ignition coil F and its diagnostic line.
Symptoms you may notice4
- Engine lacks power while driving
- Car hesitates or jerks when slowing down
- Car hesitates or jerks at steady speed
- Car lacks power, especially when pulling away from standstill
What the fault can affect1
- Closed loop control of lambda is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.