Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P036692
    VOLVO

    ECM-P036692 - Camshaft Position Sensor "B" Circuit Range/Performance (Bank 1). Component Failures. Performance or incorrect operation

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    8 models

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (8)
    • Volvo S60 (2011–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
    • Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15 only
    • Volvo V40 (2013–)2015Engine B4204T11 only
    • Volvo V40 Cross Country (2013–)2015Engine B4204T11 only
    • Volvo V60 (2011–)2014–2015Engine B4204T11, B4204T12, B4204T15, B4204T9 only
    • Volvo V70 (2008–)2014–2015Engine B4204T11 only
    • Volvo XC60 (2009–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
    • Volvo XC70 (2008–)2014–2015Engine B4204T11 only

    What does this fault code mean?

    The code applies to the exhaust camshaft sensor on bank 1 and is set when the camshaft segments fall outside a set range during start-up. The code does not say which type of fault it is.

    Possible causes

    • Fault in the cable harness or connectors that only occurs now and then
    • Camshaft sensor fitted incorrectly
    • Damaged camshaft sensor

    What you can do

    1. 1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means the fault is permanent.
    2. 2Check that the fuses are intact.
    3. 3With the ignition off, check that the exhaust camshaft sensor on bank 1 is firmly fixed and correctly fitted in its position.
    4. 4Check that the connector at the exhaust camshaft sensor is free from contact resistance and oxidation.
    5. 5Check that the wiring to the exhaust camshaft sensor on bank 1 has no chafing or loose connectors.
    6. 6If the fault returns, have a workshop check the exhaust camshaft sensor on bank 1.

    Symptoms you may notice1

    • Check engine light is on or behaves abnormally

    What the fault can affect1

    • The ECM uses the crankshaft sensor signal instead

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.