VOLVO
ECM-P036900 - Camshaft Position Sensor B Circuit Intermittent (Bank 1). General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (39)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2014Engine B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2012Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2013Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2014Engine B4204T11, B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B4204T11, B5204T9, B6304T4 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015All engines except: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The fault is recorded as intermittent, meaning it comes and goes, and it may not be present right now. The engine control module (ECM) reads the teeth of the camshaft gear wheel through the camshaft sensor and counts how many segments there are over a set number of crankshaft revolutions. The code applies to the camshaft sensor on bank 1.
Possible causes
- Contact resistance and oxidation in the connections
- Open circuit in the signal wire
- Signal wire short circuit to supply voltage
- Signal wire short circuit to ground
- Camshaft sensor fitted incorrectly
- Damaged camshaft sensor
What you can do
- 1If you have a diagnostic tool, start the engine and read the fault status. 'No fault found' means the fault is not active right now.
- 2Check that the fuses are intact.
- 3With the ignition off, check the connector at the camshaft sensor on bank 1 for contact resistance and oxidation.
- 4Use a multimeter to check that the signal wire to the camshaft sensor has no open circuit and is not shorted to ground or supply voltage.
- 5Check that the camshaft sensor is correctly fitted in its position.
- 6If the fault returns, have a workshop check the camshaft sensor on bank 1 and its wiring.
Symptoms you may notice2
- Malfunction indicator light (MIL) is on
- Check engine light is on or behaves abnormally
What the fault can affect2
- The ECM uses the crankshaft sensor signal instead
- Variable valve timing (VVT) control is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.