VOLVO
ECM-P038113 - Glow Plug/Heater Indicator Circuit. General Electrical Failures. Circuit open
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (6)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The ECM sets this code when the signal for the glow plug lamp is interrupted. The fault concerns an open circuit, and although the code is named as a heater indicator circuit fault, it applies to the lamp in the instrument cluster (DIM).
Possible causes
- Fault in the CAN network
- Fault in the instrument cluster (DIM)
What you can do
- 1If you have a diagnostic tool, switch on the ignition and read the fault status. 'No fault found' means the fault is not active right now.
- 2Check that the fuses are intact.
- 3Switch on the ignition and look at the glow plug lamp in the instrument panel to see whether it lights and goes out normally.
- 4Read ECM-P038111, ECM-P038112 and ECM-P038119 with the diagnostic tool as well, since they may be related to this code.
- 5Check that the connectors in the CAN network are secure and not loose.
- 6If the fault returns, have a workshop trace the fault in the instrument cluster (DIM) and the CAN network.
Symptoms you may notice1
- No noticeable symptoms for the driver
What the fault can affect1
- The glow plug lamp is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.