VOLVO
ECM-P03AA00 - Cylinder 3 Fuel Pressure Sensor Circuit Range/Performance. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine D4204T5 only
- Volvo S80 (2007–)2014–2015Engine D4204T5 only
- Volvo V40 (2013–)2015Engine D4204T14 only
- Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
- Volvo V60 (2011–)2014–2015Engine D4204T5 only
- Volvo V70 (2008–)2014–2015Engine D4204T5 only
- Volvo XC60 (2009–)2014–2015Engine D4204T5 only
- Volvo XC70 (2008–)2014–2015Engine D4204T5 only
What does this fault code mean?
The ECM compares the readings from the injector pressure sensors with each other. When the sensor for cylinder 3 shows a different value from the other three, the fault is set. The fault is linked to that sensor only.
Possible causes
- Pressure sensor in the injector for cylinder 3 is faulty
What you can do
- 1Read the pressure sensor for cylinder 3 with a diagnostic tool and compare the value with the other three with the engine running
- 2Check that the connectors at the injector for cylinder 3 are firm and free from corrosion
- 3Check that the harness to the injector for cylinder 3 is not chafed
- 4Read and clear the fault code and check whether it returns on a road test
- 5If the fault remains, have a workshop check the pressure sensor in the injector for cylinder 3
Symptoms you may notice1
- The Check engine (malfunction indicator) light comes on or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.