VOLVO
ECM-P044413 - Evaporative Emission System Purge Control Valve "A" Circuit Open. General Electrical Failures. Circuit open
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The fault concerns an open circuit to EVAP valve A. The ECM sets the code when it receives no signal from the valve.
Possible causes
- Open circuit in the signal cable
- Damaged EVAP valve
- Contact resistance in the connections
- Open circuit in the power cable
What you can do
- 1Check the fuse for the circuit to the EVAP valve
- 2Check that the connector at the EVAP valve is clean and firmly seated
- 3Use a multimeter to check the signal wire from the control module to the EVAP valve for an open circuit
- 4Use a multimeter to check that the supply wire from the system relay to the EVAP valve has no break
- 5Have a workshop measure the resistance of the EVAP valve and judge whether the valve is damaged
Symptoms you may notice1
- The Check engine (malfunction indicator) light comes on or behaves abnormally
What the fault can affect1
- Control with two oxygen sensors is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.