VOLVO
ECM-P045900 - Evaporative Emission System Purge Control Valve Circuit High. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (41)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2014Engine B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2012Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2013Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2014Engine B4204T11, B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B4204T11, B5204T9, B6304T4 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015All engines except: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2005–2006Engine B8444S only
- Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only
- Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
- Volvo XC90 (2003–)2012–2014Engine B6324S5 only
What does this fault code mean?
The engine control module (ECM) has registered a fault in the EVAP system, the valve that controls fuel vapour from the fuel tank to the engine. The code is general and does not specify what kind of fault it is.
Possible causes
- Poor contact or corrosion in the connectors
- The signal wire is short-circuited to supply voltage
- Damaged EVAP valve
What you can do
- 1Read out and note the code, clear it and road test to see whether it returns
- 2Check that the fuses are intact. Their locations are given in the owner's manual or on the fuse box cover
- 3Check that the connector at the EVAP valve is fully seated and free from oxidation, and remedy a loose or corroded connection
- 4Look for chafing or pinch damage on the wire to the engine control module, and use a multimeter to check for contact with supply voltage
- 5With a diagnostic tool, activate the EVAP valve and listen or feel for vibration. No vibration suggests a permanent fault; vibration means it is not active now
- 6Replace a damaged EVAP valve, clear the code and road test. If the fault remains, have a workshop with diagnostic equipment check the valve and wiring
Symptoms you may notice2
- Malfunction indicator lamp (MIL) lights up
- Fuel odour
What the fault can affect1
- Fuel trim, the automatic adjustment of the fuel mixture, is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.