VOLVO
ECM-P04804B - Fan 1 Control Circuit. System Internal Failures. Over temperature
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The code indicates that the electric fan or its control is overheated. The engine control module (ECM) monitors the fan function continuously and tests it while the engine runs. The causes may be that the driver circuit in the engine control module has become too hot, high temperature in the engine bay or a damaged electric fan control module.
Possible causes
- The driver circuit in the engine control module overheats because of a low resistance to the battery, but it is not fully short-circuited
- High temperature in the engine bay
- Damaged electric fan control module
What you can do
- 1With the ignition off, check that nothing blocks the fan blades and that the fan turns freely
- 2Check the fuses for the cooling fan. Their location is given in the owner's manual
- 3If you have a diagnostic tool, read the fault status with the engine running to see whether the fault is active
- 4If the fault returns, have a workshop check the fan control and the electric fan control module
- 5After repair the fault status should show no fault once the diagnosis is complete. Check this with a diagnostic tool
- 6Clear the fault code once the fault has been remedied, and road test
Symptoms you may notice1
- The engine may run hot
General guidance for car owners. Diagnosis on the car can point to a different cause.