VOLVO
ECM-P050082 - Vehicle Speed Sensor A. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (41)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007All engines except: B5254T6
- Volvo S80 (2007–)2008All engines except: B4204S3, B4204S4, B5254T6, D4204T
- Volvo S80 (2007–)2009Engine B6304T2, B6324S, B8444S, D5244T4, D5244T5 only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S, D4164T only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S, D4164T only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2014Engine B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9, D4204T14 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S, D5244T4, D5244T5 only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2, D4164T only
- Volvo V70 (2008–)2011Engine B6304T4, B6324S5, D4164T only
- Volvo V70 (2008–)2012Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2013Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2014Engine B4204T11, B5204T9, B6304T4, B6324S5, D4204T5 only
- Volvo V70 (2008–)2015Engine B4204T11, B5204T9, B6304T4, D4204T5 only
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014All engines except: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015All engines except: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008–2009
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2012Engine B6324S5 only
- Volvo XC90 (2003–)2013–2014All engines except: B5254T9
What does this fault code mean?
The engine control module (ECM) compares the vehicle speed from the brake control module (BCM) with that from the transmission control module (TCM) over the CAN network. The code is set when the difference becomes too large or when the primary signal is faulty. the transmission module speed signal is then used instead.
Possible causes
- The cause lies in the brake control module (BCM)
- Fault in the CAN network
What you can do
- 1Read the fault codes in the brake control module and the transmission control module with a diagnostic tool, and remedy them first
- 2Check that the CAN connectors are secure and free from oxidation
- 3After recharging or battery replacement, press the brake pedal twice within about two seconds to activate the cruise control
- 4Clear the fault code only once the fault has been remedied, and road test
- 5The brake system is safety-critical, so have a workshop check the brake control module. Do not work on the brake system yourself
Symptoms you may notice3
- The cruise control does not work at all
- A message appears on the text display
- The cruise control cannot be engaged
What the fault can affect2
- A secondary transmission module speed signal (TCM) is used
- The cruise control is switched off while the fault is active
General guidance for car owners. Diagnosis on the car can point to a different cause.