VOLVO
ECM-P053317 - A/C Refrigerant Pressure Sensor A Circuit High. General Electrical Failures. Circuit voltage above threshold
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The ECM tests the A/C pressure sensor electrically. The code is set when the module finds that the voltage in the circuit is too high. The cause may be a signal wire shorted to supply voltage, a damaged connector or wire, or a damaged sensor.
Possible causes
- Signal wire shorted to supply voltage
- Connector or wire damaged
- Damaged A/C pressure sensor
What you can do
- 1Check that the fuses are intact
- 2Check that the A/C pressure sensor connector is secure and undamaged
- 3Use a multimeter to check that the signal wire to the sensor is not shorted to supply voltage
- 4Where possible, check the functions with the buttons and controls: A/C, heating and fan, and see whether the temperature becomes even
- 5Clear the code and see whether it returns after a drive
- 6If the fault returns, have a workshop with diagnostic equipment check the sensor and its wiring
Symptoms you may notice3
- The air conditioning does not work
- Uneven cabin temperature
- The heating does not work properly
What the fault can affect1
- A constant value is used for the pressure
General guidance for car owners. Diagnosis on the car can point to a different cause.