VOLVO
ECM-P05621C - System Voltage Low. General Electrical Failures. Circuit voltage out of range
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The ECM monitors the system voltage and sets the code when the voltage is wrongly low. The causes can lie in the generator, the charging system or the battery, but also in contact resistance in connectors and connections.
Possible causes
- Problem with the generator
- Faulty charging system
- Damaged battery
- Contact resistance or oxidation in connectors and connections
What you can do
- 1Check that the fuses are intact
- 2Check the battery terminals and connections for contact resistance and oxidation
- 3Check the other connectors and connections in the charging circuit for looseness and oxidation
- 4If you have diagnostic equipment: read the system voltage in live data with the engine running and compare it with the value when the engine is stopped
- 5If the connections are clean and tight, have a workshop check the generator and battery
Symptoms you may notice2
- The engine is hard to start and the starter motor cranks slowly, hard to tell when it happens
- The engine does not start, hard to tell when it happens
General guidance for car owners. Diagnosis on the car can point to a different cause.