VOLVO
ECM-P057500 - Cruise Control Input Circuit. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
14 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (41)
- Volvo C30 (2007–2013)2011–2013Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine B6304T4, D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine B6304T4, D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013–2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2009Engine B6304T2, B6324S, B8444S, D5244T10 only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S, D5244T10, D5244T14, D5244T19 only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S, D5204T2, D5244T10 only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013–2014All engines except: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T
- Volvo V40 (2013–)2013All engines except: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015All engines except: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015All engines except: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine B6304T4, D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine B6304T4, D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013–2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Engine B6304T2, B6324S only
- Volvo V70 (2008–)2009Engine B6304T2, B6324S, D5244T10 only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2, D5244T10, D5244T14, D5244T19 only
- Volvo V70 (2008–)2011Engine B6304T4, B6324S5, D5204T2, D5244T10 only
- Volvo V70 (2008–)2012Engine B6304T4, B6324S5, D5204T3, D5244T11, D5244T15 only
- Volvo V70 (2008–)2013–2014All engines except: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2015All engines except: B4164T, B4164T2, D4162T
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010All engines except: B4204T6
- Volvo XC60 (2009–)2011–2012All engines except: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015All engines except: B4204T7
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010–2015
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The CEM reads the cruise control buttons on the steering wheel and passes the signals to the ECM over CAN. The code is set when the information shows that one of the buttons has been held pressed for too long, and the button is then treated as stuck.
Possible causes
- One or more cruise control buttons have stuck in the pressed position
- Damaged steering wheel button assembly
- Faulty signal from the cruise control button panel
- The fault may lie in the central electronics module (CEM) or the steering angle sensor control module (SAS)
What you can do
- 1Check that the fuses are intact
- 2Look at the cruise control buttons on the steering wheel and check that none is held in the pressed position
- 3If you have diagnostic equipment: read the CEM fault codes and deal with them first, then clear this code
- 4If you have diagnostic equipment: read the button status in live data and check that the status returns when the button is released
- 5Check that the connectors to the steering wheel button assembly and to the steering angle sensor are firmly seated and not corroded
- 6If the above shows nothing, have a workshop look for the fault in the central electronics module (CEM) or the steering angle sensor control module (SAS)
Symptoms you may notice2
- Cruise control does not work at all
- Cruise control does not engage
What the fault can affect3
- Cruise control is switched off while the fault is active
- Cruise control cannot be activated
- The speed limiter is not available
General guidance for car owners. Diagnosis on the car can point to a different cause.