VOLVO
ECM-P057800 - Cruise Control Multi-Function Input A Circuit Stuck. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (8)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo S80 (2007–)2010–2011Engine D4164T only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2010–2011Engine D4164T only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The ECM receives cruise control information from several other control modules over CAN, including the buttons on the steering wheel. The code is set when the ECM receives a CAN message reporting a fault in the cruise control buttons. The fault can be checked when any of the buttons is used while driving.
Possible causes
- A sticking or locked cruise control button
- The message from the cruise control buttons has a wrong checksum
- Damaged cruise control button assembly
- Several buttons activated at the same time
What you can do
- 1Check that the fuses are intact
- 2Press the cruise control buttons on the steering wheel one at a time and check that they return fully and do not stick
- 3If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active after using the buttons on a safe test drive
- 4Clear the code and road test the car. Check whether it returns when the cruise control buttons are used
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.