VOLVO
ECM-P058100 - Cruise Control Multi-Function Input A Circuit High. Bus Signal / Message Failures. Invalid serial data received
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (6)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The ECM monitors the cruise control function internally. The code concerns invalid data for the cruise control input, and for serious faults the cruise control is switched off. The code is tested while the engine is running.
Possible causes
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
What you can do
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active
- 3Look at the connectors in the cruise control circuit and check for contact resistance and oxidation
- 4Clear the code and road test the car to see whether it returns
- 5If the fault returns, have a workshop check the CAN network
Symptoms you may notice1
- No noticeable symptoms for the driver
What the fault can affect1
- The cruise control function does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.