VOLVO
ECM-P059464 - Cruise Control Servo Control Circuit / Open. Algorithm Based Failures. Signal plausibility failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (6)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The ECM receives cruise control information from several other control modules over CAN. The code concerns a signal that is judged to be implausible, and for serious faults in the cruise control function it is set and the cruise control is switched off.
Possible causes
- Fault in the cruise control function
- Active fault codes for the cruise control function
What you can do
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status for the cruise control and see whether the fault is active
- 3If you have diagnostic equipment: read out other active fault codes for the cruise control and deal with them first
- 4Clear the code and road test the car with the cruise control switched on to see whether it returns
- 5If the fault remains, have a workshop look for the fault in the cruise control function
Symptoms you may notice1
- Cruise control does not engage
General guidance for car owners. Diagnosis on the car can point to a different cause.