ECM-P060500
VOLVO
ECM-P060500 - Internal Control Module Read Only Memory (ROM) Error. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsS60 (2011–), S80 (2007–), V70 (2008–)
Show models by year and engine (12)
- Volvo S60 (2011–)2011–2012Engine B5254T5 only
- Volvo S80 (2007–)2007Engine B5254T6 only
- Volvo S80 (2007–)2008Engine B4204S3, B4204S4, B5254T6, D4204T only
- Volvo S80 (2007–)2009Engine B4204S3, B4204S4, B5254T6, B5254T8, D4204T only
- Volvo S80 (2007–)2010Engine B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, D4204T only
- Volvo S80 (2007–)2011Engine B4204S3, B4204S4, B5254T10, B5254T11, B5254T8 only
- Volvo S80 (2007–)2012Engine B5254T10 only
- Volvo V70 (2008–)2008Engine B4204S3, B4204S4, B5254T6, D4204T only
- Volvo V70 (2008–)2009Engine B4204S3, B4204S4, B5254T6, B5254T8, D4204T only
- Volvo V70 (2008–)2010Engine B4204S3, B4204S4, B5254T10, B5254T11, D4204T only
- Volvo V70 (2008–)2011Engine B4204S3, B4204S4, B5254T10, B5254T11 only
- Volvo V70 (2008–)2012Engine B5254T10 only
What does this fault code mean?
The ECM constantly checks its ROM memory and sets the code on an internal fault. Consequence: the engine control module tries to restart itself, Engine power and engine speed are limited.
Possible causes
- The ECM software is faulty
- Damaged engine control module (ECM)
What you can do
- 1Check that the fuses are intact
- 2Clear the code and road test the car to see whether it returns
- 3If you have diagnostic equipment: read the code status after the ignition has been switched on
- 4If the fault returns, have a workshop reload the engine control module software
- 5If that does not help, have a workshop replace the engine control module (ECM)
Symptoms you may notice5
- The environment lamp is lit
- The environment lamp flashes
- The engine stalls
- The starter motor cranks but the engine does not start
- The check engine lamp lights or behaves abnormally
What the fault can affect2
- The engine control module tries to restart itself
- Engine power and engine speed are limited
General guidance for car owners. Diagnosis on the car can point to a different cause.