VOLVO
ECM-P060661 - Control module processor. Algorithm Based Failures. Signal calculation failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
11 modelsC30 (2007–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (33)
- Volvo C30 (2007–2013)2013Engine D4162T only
- Volvo S60 (2011–)2011Engine B6304T4 only
- Volvo S60 (2011–)2012Engine B6304T4, D4162T only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D4162T only
- Volvo S60 (2011–)2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5, D4162T only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4162T only
- Volvo S80 (2007–)2014All engines except: B4164T, B4164T2, B4204T6, B4204T7, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015All engines except: B4164T, D5204T3, D5244T15
- Volvo V40 (2013–)2013All engines except: B4164T, B4164T3, D5204T4, D5204T6
- Volvo V40 (2013–)2014Engine B5204T8, B5204T9, B5254T12, B5254T14, D4162T only
- Volvo V40 (2013–)2015All engines except: B4164T, B4164T3, B4164T4, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014All engines except: B4164T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D5204T6
- Volvo V60 (2011–)2011Engine B6304T4 only
- Volvo V60 (2011–)2012Engine B6304T4, D4162T only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4, D4162T only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4162T, D4204T5 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4162T, D4204T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2012Engine B6304T4, B6324S5, D4162T only
- Volvo V70 (2008–)2013Engine B5204T9, B6304T4, B6324S5, D4162T only
- Volvo V70 (2008–)2014Engine B4204T11, B5204T9, B6304T4, B6324S5, D4162T, D4204T5 only
- Volvo V70 (2008–)2015Engine B4204T11, B5204T9, B6304T4, D4162T, D4204T5 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014All engines except: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015All engines except: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The ECM continuously monitors several internal signals by calculating them and comparing them with each other. The code is set when an internal check gives an impermissible result, and it is checked with the engine at idle. The most common causes are a weak battery or corroded connections.
Possible causes
- Poorly charged battery or corroded connection cables
- Damaged software in the ECM
- Damaged ECM
What you can do
- 1Read the code with the engine at idle and note whether it is active right now
- 2Check that the battery is fully charged and that the battery terminals and earth connections are tight and clean
- 3Check that the connectors at the battery and the ECM are tight and free from corrosion
- 4If the fault comes back, have a workshop reload the software in the ECM. If that does not help, the module needs replacing
Symptoms you may notice5
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
- The engine runs poorly and lacks power
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
- The problems may be present all the time or only now and then
What the fault can affect1
- Some internal signals in the ECM are replaced by default values
General guidance for car owners. Diagnosis on the car can point to a different cause.