VOLVO
ECM-P060700 - Control Module Performance. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (11)
- Volvo S60 (2011–)2014–2015Engine D4204T5 only
- Volvo S80 (2007–)2007Engine B8444S only
- Volvo S80 (2007–)2008–2011Engine B4204S3, B4204S4, B8444S only
- Volvo S80 (2007–)2014–2015Engine D4204T5 only
- Volvo V40 (2013–)2015Engine D4204T14 only
- Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
- Volvo V60 (2011–)2014–2015Engine D4204T5 only
- Volvo V70 (2008–)2008–2011Engine B4204S3, B4204S4 only
- Volvo V70 (2008–)2014–2015Engine D4204T5 only
- Volvo XC60 (2009–)2014–2015Engine D4204T5 only
- Volvo XC70 (2008–)2014–2015Engine D4204T5 only
What does this fault code mean?
The ECM has recorded an internal fault. The code is a general fault code for the module and does not state a more specific fault type. It can also be set while driving.
Possible causes
- Poorly charged battery or corroded connection cables
- Damaged software in the ECM
- Damaged ECM
What you can do
- 1Read the code with the ignition on and note whether it is active right now
- 2Check that the battery is charged and that the battery terminals and earth connections are tight and clean
- 3Clear the code and road test the car to see whether it comes back
- 4If the fault comes back, have a workshop reload the software in the ECM. If that does not help, the module needs replacing
Symptoms you may notice3
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
- Malfunction indicator lamp comes on
- The engine responds poorly to the accelerator pedal
What the fault can affect1
- Some internal signals in the ECM are replaced by default values
General guidance for car owners. Diagnosis on the car can point to a different cause.