What does fault code ECM-P061547 mean?

Diagnostic fault code details for ECM-P061547 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Repair service at OBD Tuning.

VOLVO

ECM-P061547 - Starter Relay Circuit. System Internal Failures. Watchdog / safety µC failure

System

Engine Control Module (ECM)

Volvo models this fault code applies to

Applies to the following models:

8 models

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Show models by year and engine (8)

What does this fault code mean?

The ECM has a drive stage for the starter relay built in, and supervision software checks that the drive stage does what the software requests. The code is set when this does not match. Although the code is named watchdog, it concerns the starter relay drive stage inside the module.

Possible causes

Damaged ECM
The software is faulty

What you can do

1Read the code with the ignition on and note whether it is active right now
2Check the battery charge and that the battery terminals and earth connections are tight and clean
3Have a workshop reload the software in the ECM, and replace it if the fault remains

Symptoms you may notice3

The engine does not start, either always or only sometimes, and the starter motor does not crank
Clicking sound when starting
Warning symbol and message in the display

What the fault can affect2

A service request appears in the instrument panel display
Vehicle performance is limited if the fault remains for a longer period

General guidance for car owners. Diagnosis on the car can point to a different cause.