What does fault code ECM-P061613 mean?

Diagnostic fault code details for ECM-P061613 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Repair service at OBD Tuning.

VOLVO

ECM-P061613 - Starter Relay Circuit Low. General Electrical Failures. Circuit open

System

Engine Control Module (ECM)

Volvo models this fault code applies to

Applies to the following models:

5 models

S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

Show models by year and engine (20)

What does this fault code mean?

The ECM checks the signal from the starter relay through the earth wire, and the code is set when the signal is missing or wrong. The code indicates an open circuit, meaning a break, and the fault may lie in the earth wire between the module and the starter relay or in the relay itself.

Possible causes

Break in the earth wire between the ECM and the starter relay
Internal fault in the starter relay

What you can do

1Check the battery charge and that the battery terminals and earth connections are tight and clean
2If you have a multimeter: check that the earth wire between the ECM and the starter relay has no break
3Check the connections and wiring between the ECM and the starter relay for breaks and loose contacts
4If the fault cannot be found, have a workshop try a new starter relay

Symptoms you may notice3

Auto start does not work
The starter motor does not turn
The engine does not start, either always or only sometimes, and the starter motor does not crank

General guidance for car owners. Diagnosis on the car can point to a different cause.