VOLVO
ECM-P061D00 - Internal Control Module Engine Air Mass Performance. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsS60 (2011–), S80 (2007–), V70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2011–2012Engine B5254T5 only
- Volvo S80 (2007–)2007–2008Engine B5254T6 only
- Volvo S80 (2007–)2009Engine B5254T6, B5254T8 only
- Volvo S80 (2007–)2010–2011Engine B5254T10, B5254T11, B5254T8 only
- Volvo S80 (2007–)2012Engine B5254T10 only
- Volvo V70 (2008–)2008Engine B5254T6 only
- Volvo V70 (2008–)2009Engine B5254T6, B5254T8 only
- Volvo V70 (2008–)2010–2011Engine B5254T10, B5254T11 only
- Volvo V70 (2008–)2012Engine B5254T10 only
What does this fault code mean?
The engine control module has registered a fault showing that the load signal calculated by the normal engine functions is lower than what the internal monitoring calculates. It can be a knock-on code caused by dirt in the throttle unit or by objects that have got into the intake passages. Those should be dealt with first.
Possible causes
- Dirt or contaminants in the throttle unit
- Foreign objects in the intake passages
- Damaged engine control module (ECM)
What you can do
- 1Look into the intake passages for foreign objects, and check the throttle unit for contamination. Remedy these first
- 2If you have a diagnostic tool: read the status of the code after the repair
- 3If the fault remains: have a workshop read the control module with diagnostic equipment and decide whether it needs replacing
Symptoms you may notice4
- The maximum engine speed is too low
- The cruise control does not work at all
- Uneven idle
- The environmental lamp lights
What the fault can affect1
- Engine speed and torque are limited to a calculated reasonable value
General guidance for car owners. Diagnosis on the car can point to a different cause.