VOLVO
ECM-P062900 - Fuel Pump A Control Circuit High. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (44)
- Volvo S60 (2011–)2011–2012Engine B5254T5, B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007All engines except: D5244T4, D5244T5
- Volvo S80 (2007–)2008Engine B5254T6, B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2009Engine B5254T6, B5254T8, B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B5254T10, B5254T11, B5254T8, B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B5254T10, B5254T11, B5254T8, B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012Engine B5254T10, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2014Engine B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Engine B5254T6, B6304T2, B6324S only
- Volvo V70 (2008–)2009Engine B5254T6, B5254T8, B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B5254T10, B5254T11, B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011Engine B5254T10, B5254T11, B6304T4, B6324S5 only
- Volvo V70 (2008–)2012Engine B5254T10, B6304T4, B6324S5 only
- Volvo V70 (2008–)2013Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2014Engine B4204T11, B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B4204T11, B5204T9, B6304T4 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015All engines except: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2005–2006Engine B8444S only
- Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only
- Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
- Volvo XC90 (2003–)2012–2014Engine B6324S5 only
What does this fault code mean?
The engine control module monitors the drive signal to the fuel pump control module and sets the fault code when it registers a fault on that signal. The fault means the PWM signal from the engine control module is too high. It can be caused by a short-circuited or broken signal wire, a damaged fuel pump control module, or a fault registered by the CEM.
Possible causes
- A fault logged by the central electronic module (CEM)
- Short circuit to supply voltage in the signal wire
- Damaged fuel pump control module
- Open circuit in the signal wire
What you can do
- 1Check whether the CEM has stored fault codes for the fuel pump or the fuel pump relay, and remedy them first
- 2With the ignition off, look at the connector to the fuel pump control module for contact resistance and oxidation
- 3With the ignition off and using a multimeter, check that the signal wire has no contact with supply voltage and is not broken
- 4If you have a diagnostic tool: read the fuel pump load signal in live data at warm idle and see whether it is at a normal level
- 5If the fault remains after these checks: have a workshop decide whether the fuel pump control module needs replacing
Symptoms you may notice4
- The starter motor cranks but the engine does not start
- The engine stalls, while driving or when starting
- The engine does not start, sometimes or all the time
- The check engine lamp lights or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.