VOLVO
ECM-P062B17 - Internal Control Module Fuel Injector Control Performance. General Electrical Failures. Circuit voltage above threshold
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (8)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo S80 (2007–)2010–2011Engine D4164T only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2010–2011Engine D4164T only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
Although the fault code is named for an overvoltage, the condition is the self-test of the automatic engine shut-off function. The fault code is set when the control module detects that the function is faulty, and the fault can show up as poor performance, hesitation or a warning lamp that behaves abnormally.
Possible causes
- Damaged engine control module (ECM)
What you can do
- 1With the ignition on, wait a moment and read the code's status
- 2After the test, the fault should no longer be active
- 3Check that the fuses are intact
- 4If the fault remains: have a workshop replace the engine control module
Symptoms you may notice4
- The check engine lamp lights or behaves abnormally
- The engine lacks power, even when pulling away from standstill
- The engine surges or hesitates, especially during acceleration or deceleration
- Text message and warning symbol in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.