VOLVO
ECM-P062B92 - Internal Control Module Fuel Injector Control Performance. Component Failures. Performance or incorrect operation
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (6)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The engine control module checks the amount of fuel injected against what was requested, and counts how often the difference goes beyond an upper or lower limit value. The code is set once a limit has been crossed too many times. The fault should be traced together with the other fuel system fault codes.
Possible causes
- Trace according to the other fault codes for the fuel system
What you can do
- 1There is no separate fault tracing for this code. Start with the fuel system fault codes
- 2If you have a diagnostic tool: read the status of the code with the ignition on and see whether it is active
- 3Remedy the fuel system fault codes first, then check whether this code is still present
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.