VOLVO
ECM-P062D02 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. General signal failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15 only
- Volvo V40 (2013–)2015Engine B4204T11 only
- Volvo V40 Cross Country (2013–)2015Engine B4204T11 only
- Volvo V60 (2011–)2014–2015Engine B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo V70 (2008–)2014–2015Engine B4204T11 only
- Volvo XC60 (2009–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11 only
What does this fault code mean?
The engine control module checks the injector nozzles and the internal clock of the driver stage. The fault code is set when the module finds the signal to be wrong. The fault therefore concerns the control module's own check of injection, and it can make the check engine lamp light or behave abnormally.
Possible causes
- Internal fault in the control module
What you can do
- 1With the ignition on, read the diagnostic status and fault status for the code
- 2Check that the fuses are intact
- 3Have a workshop read and remedy the fault code with diagnostic equipment, since the cause lies in the control module
Symptoms you may notice1
- The check engine lamp lights or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.