VOLVO
ECM-P062D49 - Fuel Injector Driver Circuit Performance Bank 1. System Internal Failures. Internal electronic failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15 only
- Volvo V40 (2013–)2015Engine B4204T11 only
- Volvo V40 Cross Country (2013–)2015Engine B4204T11 only
- Volvo V60 (2011–)2014–2015Engine B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo V70 (2008–)2014–2015Engine B4204T11 only
- Volvo XC60 (2009–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11 only
What does this fault code mean?
The engine control module checks the injector nozzles and the internal clock of the driver stage. The fault code is set when the control module finds the signal to be wrong. The cause is an internal fault in the control module.
Possible causes
- Internal fault in the control module
- The control module is in a test mode, for example during a workshop test
What you can do
- 1With the ignition on: read the diagnostic status and fault status for the code
- 2Check that the fuses are intact
- 3Check whether the fault is still present when the test has finished
- 4Have a workshop read and remedy the code with diagnostic equipment, since the fault lies in the control module
Symptoms you may notice1
- The check engine lamp lights or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.