VOLVO
ECM-P062E11 - Fuel Injector Driver Circuit Performance Bank 2. General Electrical Failures. Circuit short to ground
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine D4204T5 only
- Volvo S80 (2007–)2014–2015Engine D4204T5 only
- Volvo V40 (2013–)2015Engine D4204T14 only
- Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
- Volvo V60 (2011–)2014–2015Engine D4204T5 only
- Volvo V70 (2008–)2014–2015Engine D4204T5 only
- Volvo XC60 (2009–)2014–2015Engine D4204T5 only
- Volvo XC70 (2008–)2014–2015Engine D4204T5 only
What does this fault code mean?
The code concerns bank 2, where cylinders 2 and 3 are connected. The engine control module monitors the fuel system and sets the fault code when the signal to the bank 2 injectors is wrong. Here the problem is a short to ground, which may be caused by wiring or damaged injectors.
Possible causes
- Open or short circuit in the wiring
- Damaged injection valves
- A fault inside the engine control module (ECM)
What you can do
- 1Look for chafed wiring to the bank 2 injectors and check that the control signal wires are not short-circuited to each other
- 2With the ignition off and a multimeter, check that the wires to the bank 2 injectors have no break and no contact with ground
- 3Check that the connectors at the bank 2 injectors are secure and free from contact resistance and oxidation
- 4Have a workshop measure the resistance of the injectors if the fault remains
Symptoms you may notice4
- Uneven idle
- The engine stalls at idle, particularly with the air conditioning on
- The engine stalls while driving, sometimes or all the time
- The check engine lamp lights or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.