ECM-P063087
VOLVO
ECM-P063087 - VIN Not Programmed or Incompatible - ECM/PCM. Bus Signal / Message Failures. Missing message
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Show models by year and engine (9)
- Volvo C30 (2007–2013)2011–2013Engine D4162T only
- Volvo S40 (2004–2013)2011–2012Engine D4162T only
- Volvo S60 (2011–)2011–2015Engine D4162T only
- Volvo S80 (2007–)2012–2015Engine D4162T only
- Volvo V40 (2013–)2013–2015Engine D4162T only
- Volvo V40 Cross Country (2013–)2013–2015Engine D4162T only
- Volvo V50 (2004–2013)2011–2012Engine D4162T only
- Volvo V60 (2011–)2011–2015Engine D4162T only
- Volvo V70 (2008–)2012–2015Engine D4162T only
What does this fault code mean?
The code concerns the vehicle configuration that the engine control module (ECM) should receive from the central electronic module (CEM). It indicates that the message carrying the configuration is missing on the bus between the two modules, or that the information received is incorrect. The ECM compares the configuration from the CEM with the one it has stored, and the code is set when they are incorrect or do not match. The check starts when the ignition is switched on.
Possible causes
- A control module from another vehicle has been fitted
- Faulty software
- A fault in the central electronic module (CEM), which should be traced
What you can do
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check that the central electronic module (CEM) and the engine control module have secure connections, and look for loose or corroded connectors or chafed wiring between them
- 3Check whether a control module from another vehicle has been fitted, since the code is then set
- 4Trace faults in the central electronic module (CEM); if the connectors and wiring are intact, have a workshop check the configuration in the engine control module
Symptoms you may notice1
- Warning symbol and text message in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.