ECM-P067000
VOLVO
ECM-P067000 - Glow Plug Control Module 1 Control Circuit / Open. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
9 modelsC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Show models by year and engine (9)
- Volvo C30 (2007–2013)2011–2013Engine D4162T only
- Volvo S40 (2004–2013)2011–2012Engine D4162T only
- Volvo S60 (2011–)2011–2015Engine D4162T only
- Volvo S80 (2007–)2012–2015Engine D4162T only
- Volvo V40 (2013–)2013–2015Engine D4162T only
- Volvo V40 Cross Country (2013–)2013–2015Engine D4162T only
- Volvo V50 (2004–2013)2011–2012Engine D4162T only
- Volvo V60 (2011–)2011–2015Engine D4162T only
- Volvo V70 (2008–)2012–2015Engine D4162T only
What does this fault code mean?
The control circuit for glow plug control module 1 is open. The ECM controls the glow plug function through a relay in the relay and fuse box in the engine compartment, and the code is set when the signal is too high, missing or too low.
Possible causes
- Poor contact, oxidation or loose connections in the terminals
- Open circuit or short to ground or supply voltage in the signal wire
- Open circuit or short to ground in the supply wire to the relay
- Short to ground or supply voltage in the wires to the glow plugs
- Damaged glow plug relay
What you can do
- 1Check that the fuses are intact, including the fuse for the glow relay
- 2With the ignition off, check the connections to the glow relay for contact resistance and oxidation
- 3With the ignition off, use a multimeter to check that the control wire to the glow relay has no open circuit and is not shorted to ground or supply voltage
- 4If you have diagnostic equipment, read the status of the glow plug control module in live data while glowing is activated
- 5Have a workshop check the glow relay if the wiring is intact
Symptoms you may notice1
- The engine does not start, at times or all the time
General guidance for car owners. Diagnosis on the car can point to a different cause.