VOLVO
ECM-P067D00 - Cylinder 5 Glow Plug Control Circuit High. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
12 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (40)
- Volvo C30 (2007–2013)2011–2013Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T23 only
- Volvo S80 (2007–)2009Engine D5244T10 only
- Volvo S80 (2007–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo S80 (2007–)2011Engine D5204T2, D5244T10 only
- Volvo S80 (2007–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S80 (2007–)2015Engine D5204T3, D5244T15 only
- Volvo V40 (2013–)2013–2014Engine D5204T4, D5204T6 only
- Volvo V40 (2013–)2015Engine D5204T6 only
- Volvo V40 Cross Country (2013–)2013–2014Engine D5204T4, D5204T6 only
- Volvo V40 Cross Country (2013–)2015Engine D5204T6 only
- Volvo V50 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV only
- Volvo V70 (2008–)2009Engine D5244T10 only
- Volvo V70 (2008–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo V70 (2008–)2011Engine D5204T2, D5244T10 only
- Volvo V70 (2008–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V70 (2008–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17 only
- Volvo V70 (2008–)2014–2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC60 (2009–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2013All engines except: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23 only
- Volvo XC70 (2008–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC70 (2008–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC70 (2008–)2012–2013All engines except: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Engine D5204T3, D5244T11, D5244T12, D5244T15, D5244T17 only
What does this fault code mean?
The control module has detected a signal that is too high in the control circuit for the glow plug for cylinder 5. The glow plug heats the combustion chamber at start, so when its control does not work a cold engine becomes harder to start. The code is general and does not say what type of fault it is.
Possible causes
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- Defective glow plug control unit
What you can do
- 1Read and note the fault code, clear it and start the engine when cold to see whether the fault returns
- 2Check the fuses for the glow system in the owner's manual
- 3Check the connector on glow plug 5 and the wiring from it for loose, corroded or chafed spots
- 4If you have a diagnostic tool, activate glowing and check whether cylinder 5 is included
- 5Use a multimeter to check that the signal wire to glow plug 5 is not open, with the connectors disconnected
- 6If the fault remains, have a workshop check the glow plug control unit
Symptoms you may notice3
- Engine hard to start and cranks slowly
- Problem noticed at cold start
- The problem may appear after use, and it is hard to say when it occurs
General guidance for car owners. Diagnosis on the car can point to a different cause.