What does fault code ECM-P069113 mean?

Diagnostic fault code details for ECM-P069113 (Volvo C30 (2007–2013), Volvo S40 (2004–2013), Volvo S60 (2011–)). Repair service at OBD Tuning.

VOLVO

ECM-P069113 - Fan 1 Control Circuit Low. General Electrical Failures. Circuit open

System

Engine Control Module (ECM)

Volvo models this fault code applies to

Applies to the following models:

9 models

C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

Show models by year and engine (9)

What does this fault code mean?

The control signal from the engine control module to the cooling fan control module is too low, and the circuit is open according to the code. The fan is controlled steplessly on request from the engine control module, so when the control signal fails the fan cannot follow it. Engine cooling is then affected.

Possible causes

Loose connection
Contact resistance or oxidation in the connections
Open circuit in the signal wire
Damaged cooling fan control module

What you can do

1Read and clear the fault code and test-drive to see whether it returns
2Check the connections at the cooling fan control module and on the signal wire: are they secure, clean and free of oxidation?
3Look at the wire for open circuit, chafing and pinch damage. A loose connector may be enough to cause the fault
4Use a multimeter to check that the signal wire is intact between the connectors, with the connectors disconnected
5If you have a diagnostic tool, read the requested fan speed in live data and check whether the fan follows it while the engine runs
6If the fault remains, have a workshop check the cooling fan control module

Symptoms you may notice2

Engine may overheat or run hotter than normal
Temperature control or air conditioning does not work

What the fault can affect2

Electric cooling fan switched off
Air conditioning (A/C) switched off

General guidance for car owners. Diagnosis on the car can point to a different cause.